Garden Valve 0.1

THIS IS A WORK IN PROGRESS! It leaks a lot unless fully-open or fully-closed.

The plug valve and the ball valve designs seem the most solid and 3d printable. This first try is the ball valve.

Required vitamins:

2 x hose washer
4 x 25mm M3 strengthening bolts, 4 X M3 nuts
1 x 6mm airsoft BB (as axle)
1/4" hex bit to turn it

It is highly recommended to acetone-polish the part for 20min after printing it. How it works: The center ball is held tightly between two hose washers, which do all the sealing work. I'm not sure the nuts/bolts are entirely necessary, it could have just been the acetone polishing which made it stronger, but this is the first one that didn't blow apart so I'm not going to question it.

 Name                           Last modified      Size  Description
 Parent Directory                                    -   
 ball-core.stl                  2017-07-20 19:12  157K  
 ball-shell.stl                 2017-07-26 17:41  3.8M  
 ball0011.scad                  2017-07-26 17:35  3.9K  
 ballvalve.jpg                  2019-02-01 13:37   45K  
 egh.stl                        2017-06-19 14:30  276K  
 hosecap9.stl                   2017-07-14 19:04  1.4M

Apache Server at burningsmell.org Port 80