Monty Coupler

The Z axis of my terrible off-brand mendel was shuddering during rapid movement due to misalignment. I needed a coupler that could easily slip horizontally, but didn't add vertical slip. I didn't want to use a flexible coupling as that would still transmit a lot of unwanted force. I needed to accomodate significant misalignment without pounds of pressure warping something.

This is something like a four-tooth gear caught in a loose cage, so that it cannot turn without turning the cage. But it is free to wiggle a little. The cage and the gear don't need to be perfectly in line.

Using it, my printer no longer shudders in motion like a metal slug boss.

Icon  Name                           Last modified      Size  Description
[PARENTDIR] Parent Directory - [TXT] monty.scad 2026-11-06 18:27 3.7K [TXT] monty1.scad 2026-11-06 23:39 3.8K [   ] monty-setscrew.stl 2026-11-06 18:09 18K [   ] monty-spider.stl 2026-11-06 23:40 28K [   ] monty-plate.stl 2026-11-06 21:09 71K [   ] monty-cross.stl 2026-11-06 18:35 88K [IMG] monty-spider.jpg 2026-11-07 10:37 130K [IMG] monty-spider-installed.jpg 2026-11-07 10:35 202K [   ] monty-coupler.zip 2026-11-08 09:36 724K

Instructions

Technicals: This connects a 1/4" keyed motor shaft to an 8mm threaded rod. Yes, weird -- old rapman parts are like that... It prints in three pieces: The spider, the cross, and the plate to hold the spider inside the cross.

The 1/4" keyed shaft connects to the cross using a captive M5 nut and an M5 setscrew. The 8MM threaded shaft is simply a friction fit into the spider. Ream it with a knife a little so its not too tight.

Connect the plate to the cross using four 20mm M3 bolts. Use washers to taste to accomodate the height of the spider. Also use popcan shims to taste to get an even more perfect fit. You want it as exact as you can while still being free to slip horizontally!